All Transportation Products
To Build an All-Composite,
Use Crane Composites' Products

The advantages of all-composite panels are the operational cost savings that can be obtained during the expected life of a unit.

• Less heat conductivity provides better cargo protection
• One-piece panel construction improves appearance and lessens the chance of water infiltration
• Corrosion and stain resistance offers longer life and reduced maintenance costs
• Lighter weight translates into less fuel consumption and heavier cargo loading

A

Embossed ArmorTuf (EARM)
A lightweight, ultra-high-impact resistant composite panel made with woven fiberglass reinforcement and specially formulated polyester resin. Can be used as a high-impact resistant ceiling panel.

Embossed ArmorTuf with Integral Scuff (EAIS)
A lightweight, ultra high-impact liner panel. When installed, the result is a sidewall with a built-in protective wearband either 12" or 24" high.

ArmorTuf Kemply (KEM)
ArmorTuf Kemply is made by laminating Kemlite ArmorTuf panels to plywood. Kemply panels offer the high-impact resistance of ArmorTuf and the rigidity of plywood. It is an ultra-high-impact, tear resistant, lightweight composite panel made with woven fiberglass reinforced and specially formulated polyester resin.

Kemlite AFL (AFL)
A durable semi-rigid material of frp for use as a liner or scuffplate. Kemlite AFL liner is specifically designed and formulated for use in refrigerated and dry van bodies or for use as an aftermarket replacement liner.

E

Kemlite ETR (ETR)
Kemlite enhanced tear resistance translucent roof panels improve visibility without sacrificing strength. The backside engineered fabric adds significant tear resistance to an already strong roof panel. Kemlite Translucent roof panels are available in several light transmissions including 1%, 10%, and 30%.

G

GatorPlate (EGAT)
Embossed GatorPlate contains a higher glass content meaning it has a higher impact and puncture resistance than conventional frp. It is specifically designed and formulated for use as a scuffplate in high abuse areas of trailers, containers, railcars, and trucks bodies.

back to Top

ArmorTuf Kemply (KEM)
ArmorTuf Kemply is made by laminating Kemlite ArmorTuf panels to plywood. Kemply panels offer the high-impact resistance of ArmorTuf and the rigidity of plywood. It is an ultra-high-impact, tear resistant, lightweight composite panel made with woven fiberglass reinforced and specially formulated polyester resin.

Back to Top

L

Lightweight Liner L-1062 (L)
A durable, semi-rigid panel of chopped fiberglass that contains lightweight "spheres" to reduce weight as well as LumaShield surface film for added cleanability. Used for sidewalls or ceilings.

Lightweight high-strength (LHS)
A high-glass content, lightweight liner panel that can save almost 100 pounds in a refrigerated trailer when compared to 0.09" panels. Used for sidewalls and high-impact ceiling applications.

Kemlite LTR (LTR)
A durable, semi-rigid panel of fiberglass reinforced plastic (frp) using the lightweight sphere technology; having LumaShield surface film and in various panel thicknesses including tapered panels. Used for ceilings and subpan.

Kemlite LIC (LIC)
Kemlite LIC is an opaque, durable, ceiling semi-rigid panel. It is specifically designed to be used in conjunction with Reefer Roof for refrigerated trailers.

M

Monster Scuff (STI)
Specifically engineered for use as a scuffplate for refrigerated and dry van trailers, containers, and rail cars. Monster Scuff is a thick, tough, hard, and impact resistant scuffplate - dimensionally stable in all environments. It provides greater protection against dents and tears.

R

Reflections (REF)
Reflections is the ultimate high-gloss, gel-coated fiberglass reinforced polyester (frp) panel. Reflections panel upgrades the quality look of any trailer and does not require a substrate.

Reefer Roof (RISC)
Reefer Roof provides better thermal efficiencies than aluminum when exposed to solar radiation. Its white, glossy finish reflects up to two times the solar radiation and is almost one thousand times less heat conductive than aluminum roof panels.

S

Subpan (SPI)
A durable, semi-rigid frp panel used to protect the underside of a refrigerated trailer or van body from moisture penetration.

T

TransTuff Translucent Roof Panel (TRW)
TransTuf panels are an acrylic modified and UV stabilized for resistance to weather and chemicals. The TransTuff translucent fiberglass roof panel is specifically designed and formulated for use as a translucent roof in truck bodies and for aftermarket repair. It is an all woven translucent roof with formulated 10% high transmission for truck body use.

TransTuff Translucent Roof Panel (TR)
TransTuf panels are an acrylic modified and UV stabilized for resistance to weather and chemicals. The TransTuff translucent fiberglass roof panel is specifically designed and formulated for use as a translucent roof in truck bodies and for aftermarket repair.

Kemlite Translucent Fiberglass Roof Panel (TI)
Kemlite Translucent roof panels are available in cut-to-length wide sizes and offer interior visibility for safer, faster loading and unloading. Kemlite Translucent roof panels are available in several light transmissions including 1%, 10%, and 30%.

Kemlite Translucent Fiberglass Roof Panel for Van Bodies (TIB & RTIB)
Kemlite Translucent roof panels is a FRP panel available full size for seamless, one-piece high-strength roofs for van bodies. The topside gets extra protection from the elements with LumaShield surface film.

TransTuff Liner Panel (TLH)
TransTuff interior sidewall panels are semi-rigid reinforced plastic panels which exhibit excellent durability and moisture/chemical resistance. Ideal for interior sidewalls, ceilings, scuffplate, and subpan.

Phone: 1.800.435.0080 or 1.815.467.8600
Email: salestr@cranecomposites.com