Wall Protection Accessories
The newest FRP accessories are base coves, chair rails and corner guards to protect our DESIGNS, Innovative Finishes and Standard FRP panels from everyday wear and tear. The five available colors were sensibly selected to accent Crane Composites' FRP panels.
Base Cove
Complete a room with the finishing touch of a base cove that accents the walls and carpet. Installed with adhesive, these base coves prevent scratches at the bottom of the wall. Wheels and shoes are the largest offenders that these base coves will prevent damage from.
Chair Rail
Protection against bumps, slams and gouges caused from the back of chairs, service carts, wheel chairs and grocery carts. When installed as a wainscot, the chair rail delivers a finished look while providing an accent between wall sections. These chair rails look fantastic with our DESIGNS FRP patterns.
Corner Guard
Tight corners always add knicks, scratches, dents and chips. The easiest way to prevent these issues is with a corner guard.
CLICK HERE TO REQUEST SAMPLES
Colors |
||||
 |
||||
| 509 Nutmeg |
001 Malibu Sand |
204 Gray |
403 Almond |
701 Black |
Profiles |
||
 |
||
| Base Cove | Chair Rail | Corner Guard |
Standard Glasbord Moldings
Standard moldings are contractor grade moldings perfect for use with FRP panels. Crane Composites Division Bars feature patented expansion control guides to assist with proper FRP installations. Available in 10' lengths - call for additional availability.
Colors |
|||||||
 |
|||||||
| 85 White |
83 Colonial White |
84 Ivory |
70 Beige |
66 Silver |
48 Pearl Gray |
1201 Black |
15 Stone |
Profiles |
||||||
 |
||||||
| Division Bar DB |
Inside Corner IC |
Outside Corner OC |
Cap CP |
Inside Angle IA |
Outside Angle OA |
|
Silhouette Trims
Silhouette Trims offer a narrow profile to minimize the seam. Silhouette Trims are standard in the colors listed below and are also available pattern matched to the DESIGNS panel color palette to create the appearance of a seamless installation. Available in 10' lengths.
Colors |
||||
 |
||||
| 1130 Cotton White |
866 Almond Breeze |
809 Fawn Brown |
636 Morning Mist Gray |
817 Putty |
Profiles |
||||
 |
||||
| Division Bar DB |
Inside Corner IC |
Outside Corner OC |
Cap CP |
|
Aluminum Trims
Standard Aluminum Trims are designed to complement Innovative Finishes DESIGNS wall panel. The Aluminum Trims provide a contrasting and upscale look. Available in silver in 10' lengths.
Beaded Panel Moldings
Specially designed beaded division bar to complement our beaded panels, which are part of the Innovative Finishes product link. Available in 10' lengths.
Color |
 |
| 1130 Cotton White |
Profiles |
||||
 |
||||
| Beaded Division Bar DB |
Inside Corner IC |
Outside Corner OC |
Cap CP |
|
Kemply Panel Moldings
Kemply moldings are contractor grade moldings that accommodate panels up to 0.437'' thick. Available in 10' lengths and are intended for use with Kemply panels.
Color |
|
| 85 White |
Profiles |
||||||
 |
||||||
| Division Bar DB |
Inside Corner IC |
Outside Corner OC |
Cap CP |
Inside Angle IA |
Outside Angle OA |
T-Bar TB |
Kemply Two-Piece Laminated Panel Moldings
Kemply moldings are contractor grade moldings that accommodate panels up to 0.437'' thick. Available in 10' lengths.
Color |
|
| 85 White |
Profiles |
||
 |
||
| Division Bar DB |
Inside Corner IC |
Outside Corner OC |
Standard Sequentia Moldings
Standard moldings are contractor grade moldings perfect for use with FRP panels. Crane Composites Division Bars feature patented expansion control guides to assist with proper FRP installations. Available in 10' lengths - call for additional availability.
Colors |
||||||
 |
||||||
| 1130 White |
1114 Almond |
0084 Ivory |
0070 Beige |
0066 Silver |
0048 Pearl Gray |
1201 Black |
Profiles |
||||||
 |
||||||
| Division Bar DB |
Inside Corner IC |
Outside Corner OC |
Cap CP |
Inside Angle IA |
Outside Angle OA |
|
Nylon Drive Rivets
Non-staining nylon drive rivets in matching panel colors are designed for quick and easy installation. A hammer and drill are the only tools necessary with installation. When used with silicone sealants, drive rivets maintain an effective moisture seal as well as providing excellent mechanical fastening for panels.
Rivets are available in 3/4", 1" and 1.5" lengths. Available in White, Cream, Beige, Silver and Gray.
Adhesive
Titebond GreenChoice FRP Fast Grab Adhesive (4 gallon pail)
Bond FRP to many common porous building materials including drywall and non-treated plywood.
- Environmentally Safe
- VOC Compliant Quick Grab
- Minimal Bracing Cleans Easily with Water in Wet State
Titebond GreenChoice Advanced Polymer Adhesive (3.5 gallon pail)
High performance, professional strength advanced polymer adhesive specifically formulated to be used for most types of paneling installations.
- Environmentally Safe - VOC Compliant
- Contains No Water
- Trowels Easily
Recommended Substrates
Gypsum Wallboard, Fire Rated Plywood, Pressure Treated Plywood, Fiberglass Faced Gypsum Wallboard,
Mold Resistant Gypsum, Wallboard,Ceramic, Steel, Foamboard, Vinyl, PVC, FRP, Laminate, Concrete
FRP Rollers & Trowels
FRP Panel Roller
- Handle quickly adjusts from 17'' to 27''
- Sturdy and nickel plated
- No axle projections allowing for flush work into corners
V-Notched Trowel
- 5/16'' x 3/16'' x 1/4'' V
- Cold rolled steel blade
- Molded polypropylene handle
