Configure Your Sanigrid II Ceiling

Find out how much material you will need for any job by simply filling in the measurements and clicking "Configure".
Room Size (in feet, rounding up to the nearest foot)

Width:  

Length:  

Calculate for a...

2' x 2'

2' x 4'

Room Size

 

Estimated ## of pieces needed Part Description Length (ft.) Qty/Ctn.
SG201 Main Tee 12' 20
SG202 Cross Tee 4' 30
SG222 Cross Tee 2' 30
SG203 Wall Angle 12' 20
C-20 Wall Anchor 2' x 4' n/a 100
C-20 Wall Anchor 2' x 2' n/a 100
C-21 Connector Clip n/a 100
C-24 Hold Down Clip - for panels 3/32" to 9/32" thick n/a 100
C-24 Hold Down Clip - for panels 3/32" to 9/32" thick n/a 100
C-25 Hold Down Clip - for panels 9/32" to 1/2" thick n/a 100
C-25 Hold Down Clip - for panels 9/32" to 1/2" thick n/a 100
  Ceiling Panel 2' x 4' n/a Each
  Ceiling Panel 2' x 2' n/a Each

Please read the following disclaimer. Once you click the 'I Agree - Configure button, a list of estimated materials will be generated and displayed below.

Crane Composites is providing this Estimator to users without charge to aid in their development of a Sanigrid II system project material lists. The user of any material list created with this configuration is solely responsible for its content and accuracy. The Sanigrid II configuration creates a list that can, and in most cases should, be modified by the user to meet the requirements of an individual project.

*Assumptions: 2' x 2' Ceiling System uses 4' cross tees in conjunction with 2' cross tees. Wall Anchors assume main tees run parallel to the length of the room. All quantities are approximate and should be verified by the contractors take-off.